Video Page - Woodstone Cabinetry - Shop Kitchen Cabinets Online & Save Thousands!

The best kitchen plans start with accurate measurements. Whether designing your dream kitchen from scratch or revamping an existing one, the best-laid plans start with proper measurements. You need to see what space you have. What is required for this task is a tape measure, a pencil, and some scratch paper or a planning grid. Taking accurate measurements is very important to get the exact size cabinets you will need for a successful kitchen remodel.

Measuring your existing kitchen cabinets for the dimensions of your new cabinets won’t provide the available space you have for a new cabinet layout. Proper measurements and space planning help provide ease in the ordering, installation, and functionality of your ready to assemble kitchen cabinets.

HOW TO MEASURE FOR KITCHEN CABINETS

Here is the step-by-step guide on how to measure for your kitchen cabinets.

1. DRAW A FLOOR PLAN

To carefully configure the dimensions of your kitchen, start with a floor plan. Choose an area or building to design or document. Input your dimensions to scale your walls (meters or feet). Be sure to mark the exact location of doors, windows, electrical outlets, light switches, gas lines, water lines, drain lines, hood vents, or heating and air vents. Drag and drop ready-made symbols to customize your space: furniture, kitchen, bathroom and lighting fixtures, cabinets, wiring, and more.

Tip: Use this key to label openings and obstructions on your kitchen floor plan.

The first rough draft of your floor plan should resemble the below example. While it doesn’t need to be exactly to scale, it should be neat, clear, and accurate.

Tip: Take photos of your kitchen so you can compare before and after pictures of your kitchen makeover.

2. HORIZONTAL MEASUREMENTS

Once you have the primary draft of your floor plan, it’s time to measure your space. Make sure to utilize inches when you record your measurements.

FULL WALL LENGTHS

Start in one corner and measure along the wall approximately 36-inch height from the ground. Measure the wall until you reach a finale, whether it’s from an opportunity within the wall, an obstruction, or a gap. If it’s a window or a door, you’ll want to live all the way across the window or door, from outside of trim to outside of trim.

OPENINGS AND SMALL WALL SECTIONS

Measure all openings, like windows or doors, from one outside trim edge to the opposite outside trim edge. Any trim or molding around it should be a part of the measurement. Number each opening so it’s easy to reference later.

Tip: Be sure to double check the measurements when you’re done to ensure accuracy.

3. VERTICAL MEASUREMENTS

Take vertical measurements from floor to the windowsill, from windowsill to the highest point of the window, and from the highest point of the window to the ceiling. Next, measure from the floor to ceiling in a minimum of three unique spots of the kitchen. This is often important in older homes since ceiling heights can vary.

Tip: If you have a recessed ceiling or soffit, measure the height and depth and make a note on your floor plan.

4. RECORD OBSTRUCTIONS

Radiators, pipes, or vents are common obstructions that ought to be recorded, as they typically can’t be removed when it comes time to put in your new cabinets. Use the provided key and punctiliously label any obstructions.

Tip: A common obstruction to label is a heat vent in the base area of your kitchen cabinets.

5. APPLIANCES AND UTILITIES

Keep your eyes on every single large appliance, furniture, fixtures and whatever else from utilities to the water supply that you intend to install in your new kitchen cabinets. Utilities to form note of are your water system, any power sources, heating or air vents, electrical outlets, and lightweight switches. Mark the situation and the centre point of all of your permanent features.

Tip: The center point of appliances is often where the plumbing line or gas line starts.

6. KITCHEN LAYOUT PLANNING

Your completed plan should resemble the below example. Make sure to double-check your measurements for accuracy. Now that you simply skills much space you have got to figure with, you’ll start planning your kitchen layout. Does one prefer a narrow Gallery kitchen or a U-shaped layout with a peninsula?

To find out which cabinets work best in your kitchen, reference our kitchen cabinet size guide. It provides an in-depth verification of standard cabinet sizes. The base, wall, or tall cabinets you select will rely upon your storage needs and style preferences.

Tip: Account for and measure your desired appliances when planning your kitchen layout.

7. CHOOSING KITCHEN CABINETS

Once you’ve got accurate measures and an idea laid out, you’ll easily narrow down quality cabinets by size, including length, width, and depth. the proper sized kitchen cabinets will depend upon your layout. Start with our selection of stunning kitchen cabinets at wholesale prices.

Also full guidance on how to purchase affordable kitchen cabinets.

Tip: Whether you prefer assembled kitchen cabinets or ready-to-assemble kitchen cabinets, there are door styles that will pair with any kitchen theme.

Free Kitchen Estimate

If you’re looking for free 3D kitchen design also free kitchen design estimate advice, simply fill out this form. Our team of professionals will build a carefully customized and functional kitchen layout that revolves around your specific kitchen dimensions, preferences, and needs.

0/5 (0 Reviews)